kimatech 2000
AquaTreat has developed a wastewater treatment unit for treating wastewater using what is known as catalytic oxidation.
Disposal of solid materials through activated coagulation and catalytic precipitation, in which an environmentally friendly catalytic precipitant is added that contains in its crystal structure the ferric ion, which ionizes in water, forming active ferric hydroxide, which leads to the absorption of organic materials on its surface, in addition to its large density and as a result of its association with the crystal lattice of the catalytic precipitant. Which leads to its sedimentation by gravity inside the sedimentation tank, taking all the suspended solids on its way to the bottom of the sedimentation tank.
Winner of the Arab Organization for Educational Development Award, affiliated with the League of Arab States, for the best wastewater treatment plant.
The unit resides in Germany and has all approvals from the competent authorities
It is in compliance with Laws 48 of the year 82 & 4 of the year 94 for drainage on fresh water, groundwater, and the marine environment.
The unit relies on deposition and catalytic oxidation using environmentally friendly chemicals produced locally and inexpensively.
It works automatically, which makes it easy to operate without specialized workers.
It works with local technology and enjoys after-sales service and availability of spare parts.
It has a small size, short residence time, and low electricity consumption compared to biological treatment (half a kilowatt per cubic meter).
It is not affected by a change in the organic load or its interruption, as it works by a chemical method.
This tank is made of painted sheet metal and treated with a special treatment to prevent corrosion. Wastewater is entered into this tank after mixing it with sedimentation accelerators, where the suspended materials are separated and collected inside the weir located inside the sedimentation tank, as well as inside the conical vessel located at the bottom of the tank, where these suspended materials are collected. According to operating instructions.
This reactor is made of painted sheet metal, treated with a special treatment to prevent corrosion, and special electrodes are installed in it in case of electrical oxidation, and its level sensor is installed on it.
The precipitation accelerator injection system consists of a precipitation accelerator injection pump, which is a pump through which the injection dose of the accelerators can be adjusted according to the unit’s operating instructions.
The oxidation and sterilization injection system consists of an injection pump, which is a special pump through which the injection dose is adjusted according to the operating instructions.
This filter aims to completely get rid of any remaining suspended materials and also get rid of unwanted excesses of free chlorine gas to achieve the best specifications for the treated water. This filter consists of an external frame with a candle inside that can be replaced when needed in accordance with the operating instructions.
The Kimatech 2000 wastewater treatment unit is distinguished by its ability to operate automatically through the control panel and electrical power, and the operation of this panel is linked automatically in accordance with the design basics contained in the third chapter.